Field Wire Fencing in Ocala, FL | Fences R Us
Farm & Agricultural Fencing | Ocala, FL

Field Wire Fencing in Ocala, FL

Woven wire and no-climb fencing for livestock containment across Marion County farms. Cost-effective coverage on large acreage. Wood posts or T-posts. Mill-direct materials.

Get a Free Estimate ›
#3Organic Rank in Ocala
22+Years Installing
5Counties Served
4.5★71 Google Reviews

The Practical Choice for Mixed Livestock and Large Acreage in Central Florida

Board fencing is the most visible choice on Marion County horse farms. Field wire is the most practical choice on everything else. It covers more ground at lower cost, holds more livestock types, and holds up well in Florida conditions when installed correctly.

Field wire goes by several names. Woven wire. No-climb fence. Field fence. Box wire. The construction is the same: horizontal and vertical wires woven into a grid pattern, available in multiple heights and mesh sizes. The right specification depends on what you need to keep in and what you need to keep out.

Fences R Us has been installing field wire fencing across Marion, Alachua, Citrus, Levy, and Sumter counties since 2003. Manny specs the mesh size, height, and post type based on your terrain and livestock during the site visit.

Cost per linear foot
Wire: Lower
Board fence cost
Board: Higher
Livestock types held
Wire: Many
Visual appeal
Board: Higher
Acreage coverage
Wire: More
Installation speed
Wire: Faster

Relative comparison for similar acreage in Marion County conditions.

Three Types of Field Wire Fencing Used in Central Florida

The terms get used interchangeably but each has a distinct construction and use case. Here is the breakdown.

🔲

Woven Wire (Field Fence)

The classic grid-pattern woven wire fence. Horizontal wires run the length of the fence and are woven with vertical stay wires at regular intervals. Spacing between horizontals is tighter near the bottom to stop smaller animals from pushing through. It widens toward the top.

Available in heights from 26 inches to 72 inches. The most common height for general farm use in Marion County is 48 inches. Mesh openings range from 2x4 inches to 6x6 inches depending on the application.

Best for: cattle, sheep, goats, mixed pastures
🚫

No-Climb Wire (Horse Fence)

No-climb wire uses a uniform 2-inch by 4-inch mesh opening throughout the full height of the fence. The tighter mesh prevents horses from catching a foot in the wire. Foot entanglement is the main safety concern with standard field wire on horse properties.

Available in 48-inch and 60-inch heights. Often installed with a board top rail for visibility and additional strength. The most common wire fence choice on horse properties in Marion County.

Best for: horses, foals, high-value livestock

Welded Wire (Hog and Goat Fence)

Welded wire uses spot-welded intersections rather than woven connections. The result is a stiffer panel that holds its shape better under pressure from smaller animals. Common mesh sizes are 2x4 inches for hogs and goats and 4x4 inches for larger livestock.

Welded wire costs slightly more than woven wire but is more rigid and better suited for high-pressure applications. It does not have the graduated spacing of field fence, so the mesh size is uniform from top to bottom.

Best for: hogs, goats, sheep, small animals

Field Wire Mesh Sizes and What They Are Used For

Mesh opening size determines what animals can get through the fence. The right mesh depends entirely on what you are containing. Here are the standard specifications used on Marion County farms.

2x4
inch opening
No-Climb / Horse Fence
Tightest common mesh. Prevents foot entanglement on horse properties.
4x4
inch opening
Hog and Goat
Stops most small livestock. Common on goat and sheep operations.
6x6
inch opening
Cattle and Large Livestock
Standard for cattle perimeters. Economical on large acreage.
2x6
inch opening
Graduated Field Fence
Tighter at bottom, wider at top. Most common woven wire configuration.
Field Wire vs No-Climb Mesh Comparison
Graduated Field Wire Tighter spacing at bottom No-Climb Wire Uniform 2x4 mesh throughout Tighter Wider Ground Uniform

Diagram is illustrative. Actual wire spacing varies by product specification and gauge.

Wood Posts vs T-Posts for Field Wire Fencing

Field wire can be strung on wood posts, steel T-posts, or a combination of both. The right choice depends on your budget, terrain, and the animals you are containing.

Post Type Spacing Lifespan in FL Relative Cost Best Use
Creosote Wood Post 10 to 12 ft 25 to 40 years Highest Corners, gates, high-pressure runs
Pressure Treated Pine 10 to 12 ft 15 to 25 years Mid General farm use, line posts
Steel T-Post 8 to 10 ft 20 to 30 years Low Large acreage, budget-focused jobs
Combination Varies Matches wood post life Mid-low Most common setup on Marion County farms

The combination approach uses wood posts at corners, gates, and ends where strength matters most. T-posts fill in the line between wood posts. This keeps the fence strong at load-bearing points without paying for wood posts across every foot of a large pasture.

Corner posts on field wire: Corner and end posts carry the full tension of the wire. They must be set deeper than line posts and braced with a horizontal brace and diagonal wire back to the next post. A corner post that fails takes a long section of wire fence with it. Fences R Us sets all corner assemblies in concrete.

Which Field Wire Specification Works for Your Animals

The wrong mesh size wastes money and fails to contain your livestock. Here is the specification Fences R Us uses for each common livestock type in Central Florida.

Animal Recommended Mesh Recommended Height Post Type Top Wire Needed?
Cattle 6x6 inch woven wire 48 inches Wood or combination Usually no
Horses 2x4 inch no-climb 54 to 60 inches Wood posts Yes, board top rail
Sheep 4x4 inch woven wire 48 inches Wood or T-post Recommended
Goats 4x4 inch woven wire 48 to 54 inches Wood or T-post Yes, goats climb
Hogs 2x4 inch welded wire 36 to 48 inches Wood posts No
Mixed livestock 2x6 graduated field fence 48 inches Combination Recommended

What Affects the Cost of Field Wire Fencing in Ocala

Field wire fencing costs less per linear foot than board fencing on most jobs. The main cost variables are acreage, mesh type, post selection, and the number of gates.

Wire Type and Mesh Size

No-climb wire costs more than standard woven wire. The tighter mesh uses more material per square foot. Welded wire sits between the two. For large acreage where budget matters, standard 6x6 woven wire on T-posts is the most cost-effective option.

Post Selection

Creosote wood posts cost more than T-posts. The combination approach gets you wood post strength at corners and gates without paying for it on every line post. Most Marion County farms use this setup.

Linear Footage

Larger jobs cost less per foot than smaller ones. The mobilization cost spreads over more footage. A 2,000-foot pasture perimeter has a lower per-foot cost than a 500-foot paddock divider using the same materials.

Gates

Every gate adds to the total cost. Gate posts require concrete and closer spacing. The gate itself, hardware, and hinges add material cost on top of the post work. A 12-foot double farm gate costs more than a 4-foot walk-through gate.

Terrain

Flat, clear land is the easiest and cheapest to fence. Slopes, standing water, tree roots, and existing fence to remove all add time and labor. Manny walks the property and notes terrain conditions before quoting.

Tension and Bracing

Proper field wire installation requires corner bracing assemblies at every turn and end. Bracing uses more material and takes more time to build right. A fence with no corner bracing will sag within a few seasons as the wire tension pulls the corner posts inward.

Call (352) 266-2849 to schedule a site visit. Manny gives a firm written quote after measuring the property.

Field Wire Fencing Across Five Central Florida Counties

Fences R Us installs field wire fencing for farms and rural properties within roughly one hour of Ocala.

Marion CountyOcala, Belleview, Dunnellon, Silver Springs, Citra, McIntosh, Reddick
Alachua CountyGainesville, Newberry, Archer, Micanopy, Hawthorne
Citrus CountyInverness, Crystal River, Floral City, Lecanto
Levy CountyChiefland, Williston, Bronson, Yankeetown
Sumter CountyBushnell, Coleman, Webster, Center Hill

Other Agricultural Fencing Options

Field wire is one of several farm fence types available from Fences R Us. See the full Farm & Agricultural Fencing page for the complete list.

Frequently Asked Questions About Field Wire Fencing in Ocala, FL

What is the difference between field wire and no-climb fence?
Field wire uses a graduated mesh pattern with wider openings near the top and tighter openings near the bottom. No-climb wire uses a uniform 2x4 inch mesh throughout. No-climb is the safer choice for horse properties because horses cannot catch a foot in the tighter mesh. Standard field wire works well for cattle, sheep, and mixed livestock.
Can field wire fence keep goats in?
Goats are one of the hardest animals to fence. They push through gaps, climb over low fences, and test every weak point. For goats, 4x4 inch woven wire at 48 to 54 inches tall with a top strand of wire is the minimum. A top wire prevents climbing. Posts should be no more than 8 feet apart to keep the wire tight under pressure.
Should I use wood posts or T-posts for field wire?
The combination approach works best for most Marion County farms. Wood posts at corners, ends, and gates carry the tension load. T-posts fill in the line runs. This gives you a structurally sound fence without the cost of wood posts across every foot of a large perimeter.
How long does field wire fencing last in Florida?
Galvanized field wire lasts 15 to 25 years in Florida conditions. The wire itself outlasts the wood posts in most cases. T-posts last 20 to 30 years before rust becomes a structural concern. Keeping the fence tensioned and fixing broken wire quickly extends the overall lifespan.
How high should field wire fence be for cattle?
48-inch woven wire is the standard height for cattle perimeter fencing in Marion County. Cattle that are inclined to jump may need a top strand of barbed wire above the woven wire to discourage it. Manny will advise based on the animals during the site visit.
What is a corner brace assembly and why does it matter?
A corner brace assembly is a set of two posts connected by a horizontal brace rail and a diagonal wire that runs from the top of one post to the bottom of the next. It distributes the tension from the wire fence across both posts rather than pulling a single corner post out of the ground. Every corner and end on a field wire fence needs a proper brace assembly. Fences R Us sets all corner assemblies in concrete.

Get a Free Field Wire Fencing Estimate

Manny comes out, walks the property, and gives you a written quote. No obligation. Call (352) 266-2849 or use the form below.

Request an Estimate ›