Hay Storage Lean-To in Ocala, FL | Fences R Us
Lean-Tos & Pole Barns | Ocala, FL

Hay Storage Lean-To in Ocala, FL

Keep hay dry, preserve feed value, and cut waste. Hay storage lean-tos built for Marion County farms using pressure treated posts and 26-gauge metal roofing. Square bale and round bale configurations.

Get a Free Estimate ›
22+Years Building
5Counties Served
4.5★71 Google Reviews

Hay That Gets Wet Costs You Twice

Hay left in the rain loses feed value and can go moldy. Moldy hay causes respiratory problems in horses and cattle. It can also generate heat as it decomposes, which is a fire risk in larger stored quantities.

A hay storage lean-to solves all three problems. It keeps hay dry, maintains feed value, and keeps stored bales away from ground moisture. A properly built hay lean-to lasts 20 to 30 years. It pays for itself in reduced waste within a few seasons.

Fences R Us builds hay storage lean-tos across Marion County. Size depends on bale type: small square, large square, or round. Manny specs the structure at the site visit.

Structure SizeSmall Sq BalesRound Bales
12x24 ft~120 bales stacked 4 high~6 round bales
16x30 ft~200 bales~10 round bales
20x40 ft~350 bales~18 round bales
24x48 ft~500+ bales~28 round bales

Counts are estimates for single-layer floor storage. Stacking adds capacity but requires structural review of the roof load.

What Makes a Good Hay Storage Lean-To in Florida

Open Sides for Airflow

Hay needs airflow to stay dry and prevent mold. A lean-to with enclosed sides traps humidity. Side walls on a hay lean-to should stop at 4 feet from the ground on the prevailing wind side. This allows air to move through the bale stack while blocking wind-driven rain from the open front.

Raised Floor or Gravel Base

Ground moisture wicks into the bottom row of bales even on dry days. A 4 to 6-inch gravel base over compacted fill lifts bales above grade and lets moisture drain away. Treated wood pallets add more separation between bales and the ground on wetter properties.

Roof Overhang

A 2-foot overhang on the open side of the lean-to keeps afternoon rain off the front row of bales. Without an overhang, the outer faces of front-row bales get wet on every westward storm. Fences R Us builds a minimum 2-foot overhang on all hay lean-to front edges.

Round Bale vs Square Bale Design

Round bales are heavier and stored in a single layer on the ground. They need more floor space and less height. A 12-foot ceiling is more than enough. Square bale storage goes vertical. Stacking square bales 6 to 8 high is common. This requires more ceiling height and a stronger roof structure.

Pest Control Design

Hay storage attracts rodents. A concrete perimeter curb around the lean-to base discourages burrowing from underneath. Keeping the perimeter clear of brush and debris also helps. Metal siding on the lower walls is harder for rodents to chew through than wood board siding.

Fire risk note: Large quantities of hay stored in an enclosed space generate heat as they cure. Newly baled hay stored before it fully dries can spontaneously combust. Hay lean-tos should not be built directly adjacent to homes, barns, or structures containing animals.

Hay Lean-To Build Specifications

ComponentStandard SpecNotes
Posts6x6 pressure treatedSet 3 ft minimum in concrete
Roof pitch3:12 minimum4:12 preferred for faster water shed
Roofing26-gauge corrugated metal29-gauge available, 26-gauge preferred in FL
Side wallsPartial : 4 ft high max on air sidesFull back wall standard
Front overhang2 ft minimumProtects front row bales from rain
Floor4 to 6 in compacted gravelPerimeter concrete curb optional
Hurricane tiesAt every rafterRequired by Florida wind code

Service Across Five Central Florida Counties

Fences R Us builds lean-tos and pole barns for farms and rural properties within roughly one hour of Ocala.

Marion CountyOcala, Belleview, Dunnellon, Silver Springs, Citra, McIntosh
Alachua CountyGainesville, Newberry, Archer, Micanopy
Citrus CountyInverness, Crystal River, Floral City
Levy CountyChiefland, Williston, Bronson
Sumter CountyBushnell, Coleman, Webster

Other Structures from Fences R Us

See the full Lean-Tos & Pole Barns page for all available structures.

Frequently Asked Questions

How big of a hay lean-to do I need?
It depends on your bale type and how much hay you store at one time. A 16x30 lean-to holds roughly 200 small square bales in a single layer. Round bale storage needs more floor area and less height. Manny will size the structure at the site visit based on your storage needs.
Does a hay lean-to need enclosed sides?
No. Open sides are better for hay storage because airflow prevents mold. The back wall is always enclosed. Side walls should stop at 4 feet from the ground on the prevailing wind side to allow air movement while blocking rain. Full side walls trap humidity and encourage mold growth.
What is the best roof pitch for a hay lean-to?
A minimum 3:12 pitch. A 4:12 pitch is better for fast water shedding after Florida afternoon storms. Flat roofs collect standing water that corrodes metal roofing from above and promotes mold growth from the heat and humidity trapped underneath.
Can I store round bales and square bales in the same lean-to?
Yes. A wider lean-to with a center divider works for mixed storage. Round bales go on one side in a single layer. Square bales stack on the other side. The divider prevents round bales from rolling into the square bale stack.
How far from the barn or house should a hay lean-to be?
Hay stored in large quantities is a fire risk. Newly baled hay that has not fully dried can generate heat as it cures. A hay lean-to should be at least 50 feet from any occupied building, barn, or structure containing animals. Manny will confirm placement during the site visit.

Get a Free Estimate

Manny comes out, looks at the site, and gives you a written quote. No obligation. Call (352) 266-2849 or use the form below.

Request an Estimate ›